salut a tous ! une petite question ! quand t'il s'agi d'un pompage manuel , quel boutons faut t'il manipuler pour l'effet de sol , la performance joue t'elle un role dans ce fameux pompage,? merci !



Forum des particuliers sur le détecteur de métaux et la détection de loisir
carpet a écrit :salut a tous ! une petite question ! quand t'il s'agi d'un pompage manuel , quel boutons faut t'il manipuler pour l'effet de sol , la performance joue t'elle un role dans ce fameux pompage,? merci !Tu n'as pas une notice d'utilisation avec ton Blisstool ??![]()
For manual adjustment of the ground balance is needed:
- to be chosen the manual ground balance mode (GROUND MODE switch turned to MAN“
position);
- the DISCR LEVEL potentiometer to be set at a level „0“;
- the THRESHOLD potentiometer to be turned at a level, just before the level where the metal
detector starts slightly zoom sound made (issued torn sound, buzzing, whiz) or one or two
levels before the level of zoom (recommended for beginners searchers);
- the GROUND FINELY potentiometer, to be set at a middle position, ie at a level „5“.
Then is done vertical (up-down) movement of the search coil ranging from 2-3 cm to 20-25 cm
above the terrain, simultaneously with turning the GROUND RUDELY potentiometer. At some
levels of the GROUND RUDELY potentiometer, the sound is louder when the search coil is near
the ground, while at others the sound is louder when the search coil is high above the ground.
The balancing is actually finding the level (position) of the GROUND RUDELY potentiometer, in which
in the described manner of movement of the search coil, the metal detector does not beeps or issue
possible weak sound, or at least the pre-set audio threshold level did not change significantly.
After the base balancing by GROUND RUDELY potentiometer, if necessary, the metal detector can be
further fine balancing by GROUND FINELY potentiometer and described above vertically (up and
down) movement of the search coil.
Theophilus a écrit :c'est pas facile de lire bulgare !carpet a écrit :salut a tous ! une petite question ! quand t'il s'agi d'un pompage manuel , quel boutons faut t'il manipuler pour l'effet de sol , la performance joue t'elle un role dans ce fameux pompage,? merci !Tu n'as pas une notice d'utilisation avec ton Blisstool ??![]()
![]()
carpet a écrit :Theophilus a écrit :c'est pas facile de lire bulgare !carpet a écrit :salut a tous ! une petite question ! quand t'il s'agi d'un pompage manuel , quel boutons faut t'il manipuler pour l'effet de sol , la performance joue t'elle un role dans ce fameux pompage,? merci !Tu n'as pas une notice d'utilisation avec ton Blisstool ??![]()
![]()
Theophilus a écrit :Bonjour,
Page 17 du manuel ... j'ai compté au moins 10 potards et 3 switchs sur ce détecteur ... J'ai l'impression de retrouver mon vieux White's![]()
For manual adjustment of the ground balance is needed:
- to be chosen the manual ground balance mode (GROUND MODE switch turned to MAN“
position);
- the DISCR LEVEL potentiometer to be set at a level „0“;
- the THRESHOLD potentiometer to be turned at a level, just before the level where the metal
detector starts slightly zoom sound made (issued torn sound, buzzing, whiz) or one or two
levels before the level of zoom (recommended for beginners searchers);
- the GROUND FINELY potentiometer, to be set at a middle position, ie at a level „5“.
Then is done vertical (up-down) movement of the search coil ranging from 2-3 cm to 20-25 cm
above the terrain, simultaneously with turning the GROUND RUDELY potentiometer. At some
levels of the GROUND RUDELY potentiometer, the sound is louder when the search coil is near
the ground, while at others the sound is louder when the search coil is high above the ground.
The balancing is actually finding the level (position) of the GROUND RUDELY potentiometer, in which
in the described manner of movement of the search coil, the metal detector does not beeps or issue
possible weak sound, or at least the pre-set audio threshold level did not change significantly.
After the base balancing by GROUND RUDELY potentiometer, if necessary, the metal detector can be
further fine balancing by GROUND FINELY potentiometer and described above vertically (up and
down) movement of the search coil.